Phone: +86-13356762078

Fax: +86-536-6057366 


Company News

Company News

Your Current Location : Home News Company News

Shrinking machine is usually what causes the slow warming?

Heat shrink machine is slow or unable to rise to a higher temperature (above 160 degrees Celsius) What is the reason?
Line heater is the main power line through a magnetic switch and then to electric suction pipe, it should be sucked magnetic switch detects the contacts are normal. If the line does not pass one of the phases, the above phenomenon occurs. If suction magnetic switch normal, then check the meter to see if the machine each phase ohmic values are the same. If the normal should be shorted. If all phases are turned on but still abnormal line or heating pipes, replace the heater.


Copyright:@2008-2012Aetna Zhucheng Machinery Co., Ltd.   Information Miibenan:
Adress:Eastern City Industrial District, Mizhou street, Zhucheng City, Shandong Province  Fax:+86-536-6057366   

Mobile phone: +86-15376682788  E-mail:  Technical support: HENGTAI Internet